High-temperature heat to do this five points to protect your safety with air conditioning
1. The best direction to install the air conditioner is north, followed by the east. The air conditioner should not be installed above the door, because it will speed up the inflow of hot air when the door is opened. The air conditioner can be installed facing the door so that the indoor air pressure resists the influx of hot outdoor air. 2. The height, direction, and position of the air conditioner must be conducive to air circulation and heat dissipation, and attention should be paid to maintaining a certain distance from the combustibles such as curtains. When the air conditioner is in operation, avoid getting too close to other items. 3. The power plug should be unplugged during a sudden power failure. Wait for a few minutes after turning on the power before turning on the power. The air conditioner must use a special power outlet and line, and cannot use the power cord with lighting or other household appliances. The wire carrying capacity and the power meter capacity should be sufficient, and the plug should be in close contact with the electrical components. 4. The air-conditioner should be equipped with a one-time fuse protector to prevent the temperature rise caused by the breakdown of the capacitor and cause a fire. It is required that the fuse capacity should be appropriate and wire and copper wire should not be used instead. 5. Air conditioners should be regularly maintained, regularly cleaning the condenser, evaporator, filter, heat exchanger, wipe dust, prevent radiator plug, avoid fire hazards. KNLE2-63 Residual Current Circuit Breaker With Over Load Protection
KNLE2-63 TWO FUNCTION : MCB AND RCCB FUNCTIONS
leakage breaker is suitable for the leakage protection of the line of AC 50/60Hz, rated voltage single phase 240V, rated current up to 63A. When there is human electricity shock or if the leakage current of the line exceeds the prescribed value, it will automatically cut off the power within 0.1s to protect human safety and prevent the accident due to the current leakage.
KNLE2-63 Residual Current Circuit Breaker,Residual Current Circuit Breaker with Over Load Protection 1p,Residual Current Circuit Breaker with Over Load Protection 2p Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.korlen-electric.com
Picture Source: Baidu Images
leakage breaker can protect against overload and short-circuit. It can be used to protect the line from being overloaded and short-circuited as wellas infrequent changeover of the line in normal situation. It complies with standard of IEC/EN61009-1 and GB16917.1.