Wenzhou LED tube was rejected by Jordan for the first time
Recently, a batch of LED lamps exported to Jordan were unqualified due to random inspection by the local market supervision department, and were banned from sale and returned from the factory. According to the investigation by Wenzhou Inspection and Inspection Bureau, the electrical parameters of the batch of LED lighting tubes are 160-240V, 50/60Hz and 32W. In October 2015, they were shipped to Jordan in two batches, with a total of 3,000 US$21,300. In June of this year, the Jordanian market quality supervision department conducted a spot check and sent it to the Middle East Detection and Technical Service Laboratory (MELTTS) for testing according to the IEC60598-1:2008 standard. The test results show that the electrical strength of the sample lamp, the terminal connection mark, the cross-sectional area of ​​the wire, the external wiring, etc. do not meet the standard requirements. It is forbidden to sell the batch of lamps in the market, and the importer is required to be destroyed or returned for disposal. After communication and negotiation with the manufacturer, the Jordanian importer returned the unsold 2,053 LED tubes to the back, causing large economic losses to the production enterprises. Here, Wenzhou Inspection and Quarantine Bureau reminds export enterprises: In recent years, the requirements of imported products in the Middle East, Africa and other countries have been tightened. For example, Egypt, Sudan and the Gulf Cooperation Council require that imported products must comply with national mandatory standards or International standards, therefore, must change the inertial thinking of low quality standards for products in Asian and African countries that have been formed over the years. In accordance with the relevant standards and requirements of the importing country, we must strictly control the production management process and strengthen the quality control of the products. Otherwise, it will not only cause losses to enterprises, but also affect the international reputation of China's product quality. KNL5-63 Residual Current Circuit Breaker
KNL5-63 Moulded Case Circuit Breaker is MCCB , How to select good Molded Case Circuit Breaker suppliers? Korlen electric is your first choice. All moulded Case Circuit Breakers pass the CE.CB.SEMKO.SIRIM etc. Certificates.
Moulded Case Circuit Breaker /MCCB can be used to distribute electric power and protect power equipment against overload and short-current, and can change the circuit and start motor infrequently. The application of Moulded Case Circuit Breaker /MCCB is industrial. KNL5-63 Molded Case Circuit Breaker,Small Size Molded Case Circuit Breaker,Electrical Molded Case Circuit Breaker,Automatic Molded Case Circuit Breaker Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmoldedcasecircuitbreaker.com
Korlen electric also provide Miniature Circuit Breaker /MCB. Residual Current Circuit Breaker /RCCB. RCBO. Led light and so on .