Notice of Tender for Bidding Project of Airport Capacity Evaluation of Phase III Expansion Project of Lanzhou Zhongchuan International Airport

November 20, 2021

The Lanzhou Airport Phase III Expansion Project is a key airport promotion project for 2018 that was included in the National “Three-Year Action Plan for Major Infrastructure Construction of Transport Infrastructure” (Development and Reform Foundation [2016] No. 730). In order to promote the construction of Phase III expansion project of Lanzhou Zhongchuan International Airport, an open tender for the evaluation of airport capacity is required. The bidder was Gansu Provincial Civil Aviation Airport Group Construction Command.

2. Project overview and scope of tender
2.1 Project Overview
The flight area of ​​the Lanzhou Zhongchuan International Airport Phase III expansion project is 4E. A new runway with a length of 4,000 meters and a width of 60 meters will be built to meet the requirements for the preparation of Class F (A-380) aircraft; The taxiway has a length of 4,000 meters and a width of 23 meters (25 meters). There are also two parallel taxiways on the west side of the 2nd runway. The length is 4,000 meters and the width is 25 meters (23 meters); there are 72 flight stations. 35 parking spaces on the apron, 2 flight positions on the cargo apron, 8 flight stations on the deicing platform, 1 new tower and auxiliary buildings, 1 new control center building, 1 shift dormitory, 1 turnover room, 1 Block supporting and ancillary room, 1 integrated business room; New freight room in freight area; New 1240 square meters of fire duty station, a new 2,500 square meter fire fighting host; New 2# rescue center, building area 1000 square meters; Newly built 2 # water supply station; Newly built 343,000 square meters of terminal building, with 56 nearby stations and corresponding supporting facilities.
2.2 The scope of the tender:
The scope of this project is to evaluate the airport capacity of the Phase III expansion project of Lanzhou Zhongchuan International Airport. According to the civil aviation authority and the international civil aviation and civil aviation industry management regulations, this project carries out a comprehensive airspace assessment analysis and verification, including military and civil aviation data collection, civil and military aviation domain conflicts. Analysis, research and formulation of airspace contradiction solutions, airport airspace joint simulation assessment, and issuance of reports.
2.3 Quality Requirements
Through the review organized by the national industry authority, and approved by the national industry authority.
2.4 Design results submission time:
Before March 31, 2017.
3. Bidder qualification requirements
3.1 The bidders participating in the project design bidding must meet the following conditions:
(1) The bidder shall have an independent legal personality and provide a copy of the copy of the industrial and commercial business license that has passed the annual inspection (with the official seal of the bidder unit);
(2) In the past five years (January 1, 2012 to present), the performance of airport airspace capacity assessment for airports with at least one double runway grade 4E and above has been undertaken (provided contract performance and owner’s certification are required, non-Chinese materials must be provided in Chinese translation);
(3) Chief person in charge of the project: For the past five years (January 1, 2012 to present), he has served as the design leader of the airspace capacity evaluation of a dual-runway airport with a grade of 4E and above;
3.2 The Commonwealth does not accept bids from the Consortium.
3.3 Two or more legal persons whose legal representative is the same person, the parent company, wholly-owned subsidiary company, its holding company, and other bidders who have an asset-related relationship may not bid at the same time in the same tender project.
4. Bid registration
4.1 Applicants are requested from February 14, 2017 to February 21, 2017 (excluding official holidays), daily from 9:00 to 11:30, and from 13:30 to 16:00 (Beijing time, next with)

Electric Dc Motor

Electric dc motors were the first type widely used, since they could be powered from existing direct-current lighting power distribution systems. A electric Dc Motor's speed can be controlled over a wide range, using either a variable supply voltage or by changing the strength of current in its field windings. Small electric dc motor are used in tools, toys, and appliances. The universal motor can operate on direct current but is a lightweight motor used for portable power tools and appliances. Larger electric dc motor are used in propulsion of electric vehicles, elevator and hoists, or in drives for steel rolling mills.

Areas of application: the electric dc motor rotor part of the armature iron core, armature, commutator, such as equipment, electric dc motor is suitable for most electronic products, such as electric screwdriver, laser, smart home, gas valve, etc


Applications:



Electric Dc MotorElectric Dc Motor



Method of use: the best stable in horizontal plane, installed on theelectric dc motor output shaft parts, cannot use a hammer to knock, knock prone to press into the electric dc motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

Dc Motor 2

Operating temperature range:

Electric dc motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.

If a electric dc motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.

Storage temperature range:

Electric dc motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.

555 Dc Motor 540 Dc Motor

Service life:

The longevity of geared motors is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.

when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.

Electric dc motor


Electric Dc Motor,Mini Electric Motor,12V Electric Motor,Electric Motor Gearbox

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com