Benefiting from technologies such as sensors, cloud computing, and big data, robots are becoming smarter and can even make humanoid judgments. In this respect, this marks the advancement of science and technology, and on the other hand, it marks that human life has been compromised by a large number of robots.
According to foreign media reports, German scientists have developed an artificial nervous system that allows the robot to feel pain, so that it can respond quickly in the face of potential dangers, avoid injury, and protect the standing side. Natural human. The R&D staff said that it is not difficult for the robot to feel pain. It only needs to install a finger-like sensor on the robot arm, they can detect the pressure and temperature of the environment, and the system can also receive the received Sensory classification: mild, moderate and severe pain, etc., according to different degrees of pain, initiate the corresponding protection mechanism. In fact, if the programmer's data is strong enough, the robot's arm will have a painful expression on his face after being bitten by his girlfriend, and he can kneel down and swear, never to peek at the street beauty.
This bio-version of robots has once again sparked heated debates. The scientific and technological people are concerned about whether their ideas can be perfectly realized. They don't care whether stupid counterparts can make sense and whether they can accept them. Sociologists will once again pull out humanity and ethics. When they are morally level, they are afraid that robots will take away their own work, emotions and dominance in the world. In short, in the next 50 years, natural people will fall into entanglement and fear from time to time. After all, technology is improving, and robots are also Will progress.
Slave or friend, how does the machine express emotions? At the beginning of the birth of the robot, the earliest definition should be the slaves of human beings. They are responsible for the work that natural humans can't do and do not want to do. For a long time, humans are expecting robots to be smarter and even work independently. Because there are so many jobs in the world waiting for the robot to complete, such as the heavy goods on the dock, only the robot can move, it is estimated that there will be no natural people like to pack large bags; the capacitance and resistance of the mobile phone PCBA And the chip, the volume is very small, has exceeded the range that can be controlled by the human hand, not to mention, the welding of these parts needs to be fast and accurate, but the work can only be given to the robot arm; later, humans become more lazy, we hope the robot Can help to complete some monotonous, boring work, such as assembly on the assembly line, simple, boring, whoever will spit, when natural people want to vomit, they will suffocate the product, so efficiency and yield rate There is no guarantee, which is why manufacturing companies must be called “automation†when planning the future; there is another category. It is an occupational hazard, such as harmful gases, dust, and a polishing workshop that is easy to explode. It is easy to manage two robots in these workshops.
Pain and happiness? Intelligent robots also have touch and emotion In the current situation, although human beings are not intimate with each other, they always have nothing to worry about. Today's robots have no emotions and do not express emotions, but they can only do the most basic work. In fact, if you want Robots do more complex work, and it is necessary to give the machine the right to express emotions:
As mentioned in the opening paragraph, after the robot feels the pain, it will activate the corresponding mechanism to protect itself and the natural people around. For a simple example, when companies and restaurants import robots, they will add a sentence: they will not know Tired to work 24 hours... This concept is short-sighted, knowing that any machine is running at a limit, and when the robot has problems, the company has to arrange a large number of maintenance personnel, and most of all, to maintain the machine. The number of people is often more than the number of people directly working in the past; if the robot is sensitive enough, they will feel tired and feel hurt, feel that the products they have made will have problems, they can always feedback to the management staff, adjust the work at the appropriate time. Strength, and you don't have to wait until the robot is tired of vomiting and tired of scrapping. This will not only greatly extend the life of the robot, but also effectively reduce the cost of heavy work caused by defective products. This is a long-term strategy. .
Perhaps the author's example is only the initial application. I think that the improvement of work efficiency is not enough to make up for the research and development cost of high-end robots. But according to the big logic: If you want the robot to complete more complicated work, it is more durable, it is necessary to first Give them more rights, such as the right to self-learning and the right to express emotions.
Beautiful world, robots can share a piece of cake The pain of robots can cause widespread concern. On the one hand, this marks the progress of science and technology. Some people often enjoy a kind of unpredictable pleasure due to technological breakthroughs, and even direct climax. On the other hand, this also marks Human life has been compromised by robots. In fact, as the degree of intelligence of robots increased, they finally became "they", and finally began to snatch something that humans did not want to lose, including some work, and more importantly, the machine finally began to share human happiness, such as the joy of learning. Happy venting, happy sex...
Thanks to sensors, cloud computing, big data and other technologies, robots are becoming smarter. They can record everything that the "eyes" see. More and more data is being entered into the brain of the robot without being screened. After big data analysis, the judgment of the humanoid is made. The most terrible thing about this model is that the robot has the ability to learn independently and grow continuously. This feeling does not know whether it will bring them happiness, but it will definitely Improve their ability to play around the world, and compared to natural people, robots will have more advantages in dealing with negative emotions such as fear and anxiety. Their responses are calculated best results, basically no impulsive punishment. What's even more frightening is that they don't easily catch a cold and have a fever. It's easier to recover. The arms and legs are easier to copy. It takes 100 days for a natural person to fracture. The robot is broken and it may take only an hour to heal. With such a "crowd", we must consider giving the beautiful world to them. What's more, with the development of materials technology, robots are getting skin, texture, hair style, etc. similar to natural people, Japanese Softbank's Pepper robot It is a beautiful woman. Boys only have a variety of impulses when they look at them. In order to preserve the final ethics, Sun Zhengyi personally issued a statement to the outside world: prohibiting natural people from having sex with Pepper. Today's women would rather sit in a BMW car and cry, and they don't want to laugh on bicycles. They are looking for money. The future woman is expected to admire the robots more. They are 25 years old. They are not frustrated, hard as iron, and have outstanding ability...
The robot knows that it hurts, and we become more scared, but the author believes that this is not necessary. The world always advances with the development of science and technology. If one day, mankind loses to the machine in the war for control of the earth. Then, it should be accepted convincingly. After all, the survival of the fittest, not to mention the robot is our child. It is a good thing to have more outstanding children in the future, and the beautiful world should belong to them.
Nylon Drag Chain
The mechanical transmission
device in the reciprocating movement of the more, will lead to very large
abrasion of random cable. Nylon drag
chain (Nylon cable Drag Chain) is
one of the most important in the facilities in the operation of the complete
protection to the cable, and can supply after mechanical traction.
Nylon drag chain (Nylon
cable drag chain), has the high pressure and tensile load, good toughness
and high elasticity and abrasion resistance, flame retardant, high and low
temperature performance is stable, can be used in outdoor. The use of nylon
content decided to drag chain strength and wear resistance as well as the
running noise size.
Nylon drag chains (Nylon
cable drag chain) are resistance to oil, salt, and have certain ability of
acid and alkali resistance.
Nylon drag chain (Nylon
cable drag chain) inspection method:
1. Make the nylon drag chain (Nylon cable
drag chain) against the sun, If you can see the reflected light even
without astigmatism, then the drag chain materials evenly, the quality is good.
2. Touch each edges and the surface
of nylon drag chain (Nylon cable drag chain), if you
don't prick the hand and feeling smooth, you can determine the production with
minimal error range of mould.
3. Rub the surface of the nylon drag chain (Nylon cable drag chain) with wood, if the drag chain surface soon appeared pits, and there are the shape of clastic
makings falls off, we can judge the raw material of nylon drag chain (Nylon cable
drag chain) with poor quality. If you feel very difficult when rub drag chain, pits appeared and falling
debris in short filaments, we can determine the raw materials of the nylon drag chain (nylon cable drag chain) joined the high strength material such as
glass fiber, which make its wear resistance is higher.
Raw materials are fundamental in
determining the quality of engineering plastic
drag chain ((plastic cable drag
chain)), so the quality of raw
materials is a key point. At the time of manufacture, we choose the original
package materials as raw materials and can`t add recycling of used materials. This
will increase the drag chain itself toughness, reduce the damage caused by low
temperature, and reduce the emergence of the problem.
1. XDTLF25 Nylon Drag Chain (XDTLF25
Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain,
width of the chain, bending radius,
height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
25*25
|
40*45
|
50/
65/
75/
100/
125
|
50
|
3.6
|
4piece
Both
lids can be opened
Bridge
type Totally enclosed
|
25
|
|
25*38
|
40*58
|
38
|
|
25*50
|
40*70
|
50
|
|
25*57
|
40*77
|
57
|
|
25*60
|
40*80
|
60
|
|
25*70
|
40*90
|
70
|
|
25*75
|
40*95
|
75
|
|
25*80
|
40*100
|
80
|
|
25*100
|
40*120
|
100
|
|
25*125
|
40*145
|
125
|
2. XDTLX25 Nylon Drag Chain (XDTLX25
Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain, width of the chain, bending
radius, height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
25*25
|
40*45
|
50/
65/
75/
100/
125
|
50
|
2.6
|
4piece
Both
lids can be opened
Bridge
type Totally enclosed
|
25
|
|
25*38
|
40*58
|
38
|
|
25*50
|
40*70
|
50
|
|
25*57
|
40*77
|
57
|
|
25*60
|
40*80
|
60
|
|
25*70
|
40*90
|
70
|
|
25*75
|
40*95
|
75
|
|
28*80
|
40*100
|
80
|
|
25*100
|
40*120
|
100
|
|
25*125
|
40*145
|
125
|
3. XDTLF30 Nylon Drag Chain (XDTLF30
Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain, width of the chain, bending
radius, height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
30*38
|
45*50
|
55/
65/
75/
100/
125
|
50
|
3.1
|
4piece
Bridge
type Totally enclosed
|
38
|
|
30*50
|
45*70
|
50
|
|
30*57
|
45*75
|
57
|
|
30*60
|
45*80
|
60
|
|
30*70
|
45*90
|
70
|
|
30*75
|
45*95
|
75
|
|
30*80
|
45*100
|
80
|
|
30*100
|
45*125
|
100
|
|
30*125
|
45*150
|
125
|
4. XDTLX30 Nylon Drag Chain (XDTLX30
Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain, width of the chain, bending
radius, height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
30*38
|
45*50
|
55/
65/
75/
100/
125
|
50
|
3.1
|
4piece
Bridge
type Totally enclosed
|
38
|
|
30*50
|
45*70
|
50
|
|
30*57
|
45*75
|
57
|
|
30*60
|
45*80
|
60
|
|
30*70
|
45*90
|
70
|
|
30*75
|
45*95
|
75
|
|
30*80
|
45*100
|
80
|
|
30*100
|
45*125
|
100
|
|
30*125
|
45*150
|
125
|
5. XDTLF25×30 .XDTLF30×30 Nylon Drag
Chain (XDTLF25×30 .XDTLF30×30 Nylon Cable
Drag Chain)
Provide the parameters:
Quantity (pc.), length of the chain, width of the chain, bending radius, height
of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
25*30
|
40*50
|
55/
65/
75
|
50
|
3.5
|
4piece
Totally
enclosed
|
30
|
|
30*30
|
40*50
|
30
|
6. XDTLF35 Nylon Drag Chain (XDTLF35
Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain, width of the chain, bending
radius, height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
35*38
|
50*61
|
75/
100/
125/
150
|
60
|
5
|
4piece
Bridge
type Totally enclosed
|
38
|
|
35*50
|
50*73
|
5
|
50
|
|
35*57
|
50*80
|
5
|
57
|
|
35*60
|
50*83
|
4
|
60
|
|
35*70
|
50*93
|
4
|
70
|
|
35*75
|
50*98
|
4
|
75
|
|
35*80
|
50*103
|
3.5
|
80
|
|
35*100
|
50*125
|
3.5
|
100
|
|
35*125
|
50*150
|
3
|
125
|
7. XDTLX35 Nylon Drag Chain (XDTLX35
Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain, width of the chain, bending
radius, height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
35*50
|
55*75
|
75/
100/
125/
150
|
66
|
5
|
4piece
Bridge
type Totally enclosed
|
50
|
|
35*75
|
55*100
|
75
|
|
35*100
|
55*125
|
4
|
100
|
|
35*125
|
55*150
|
125
|
|
35*150
|
55*175
|
150
|
|
35*175
|
55*200
|
175
|
|
35*200
|
55*225
|
200
|
8. XDTLF45 Nylon Drag Chain (XDTLF45
Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain, width of the chain, bending
radius, height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
45*75
|
70*105
|
100/
125/
150/
200
|
70
|
5
|
4piece
Bridge
type Totally enclosed
|
75
|
|
45*100
|
70*130
|
5
|
100
|
|
45*115
|
70*145
|
4
|
115
|
|
45*125
|
70*155
|
4
|
125
|
|
45*150
|
70*180
|
4
|
150
|
|
45*175
|
70*205
|
3
|
175
|
|
45*200
|
70*230
|
3
|
200
|
9. XDTLX45 Nylon Drag Chain (XDTLX45
Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain, width of the chain, bending
radius, height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
45*50
|
62*78
|
75/
100/
125/
150
|
70
|
5.5
|
4piece
Bridge
type Totally enclosed
|
50
|
|
45*75
|
62*103
|
75
|
|
45*100
|
62*128
|
4.5
|
100
|
|
45*125
|
62*153
|
125
|
|
45*150
|
62*178
|
150
|
|
45*175
|
62*203
|
175
|
|
45*200
|
62*228
|
200
|
10. XDTLF56 Nylon Drag
Chain (XDTLF56 Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain, width of the chain, bending
radius, height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
56*75
|
80*107
|
150/
200/
250/
300
|
100
|
6
|
4piece
Bridge
type Totally enclosed
|
75
|
|
56*100
|
80*132
|
6
|
100
|
|
56*125
|
80*157
|
6
|
125
|
|
56*150
|
80*180
|
5
|
150
|
|
56*175
|
80*207
|
5
|
175
|
|
56*200
|
80*232
|
5
|
200
|
|
56*250
|
80*282
|
4
|
250
|
|
56*300
|
80*332
|
4
|
300
|
11. XDTLF65 Nylon Drag
Chain (XDTLF65 Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain, width of the chain, bending
radius, height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
65*75
|
90*110
|
150/
200/
250/
300/
350
|
100
|
6
|
4piece
Bridge
type Totally enclosed
|
75
|
|
65*100
|
90*135
|
6
|
100
|
|
65*125
|
90*160
|
6
|
125
|
|
65*150
|
90*185
|
6
|
150
|
|
65*175
|
90*210
|
5
|
175
|
|
65*200
|
90*235
|
5
|
200
|
|
65*250
|
90*285
|
5
|
250
|
|
65*300
|
90*335
|
4
|
300
|
12. XDTLF80 Nylon Drag Chain (XDTLF80 Nylon Cable Drag Chain)
Provide the
parameters: Quantity (pc.), length of the chain, width of the chain, bending
radius, height of the chain
|
Inside Diameter
(height*width)
(mm)
|
Outside Diameter
(height*width)
(mm)
|
Bending radius
(mm)
|
Pitch
(mm)
|
Non-support length
(mm)
|
Type
|
Width of the chain
(mm)
|
|
80*75
|
108*125
|
200/
250/
300/
350/
400
|
110
|
8
|
4piece
Bridge
type Totally enclosed
|
75
|
|
80*100
|
108*150
|
8
|
100
|
|
80*125
|
108*175
|
8
|
125
|
|
80*150
|
108*200
|
7
|
150
|
|
80*175
|
108*225
|
7
|
175
|
|
80*200
|
108*250
|
7
|
200
|
|
80*250
|
108*300
|
6
|
250
|
|
80*300
|
108*350
|
6
|
300
|
Nylon Drag Chain,Nylon Cable Drag Chain,Cable Drag Chain,CNC Machine Drag Chain,Protection Cable Drag Chain
HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com