Cable Accessories PE Glue Heavy Wall Insultion Tube

October 27, 2023

Model NO.: HBDJ-110G (3.5X) NF
Maximum Voltage: <10kv
Brand: Volsun
Min. Shrink Temperature: 80degree
Min Full Recovery Temperature: 120degree
Continuous Operating Temperature: -55degree-110degree
Sample: Free for Existing Sample
Trademark: Volsun
Specification: CE, SGS
Origin: China
HS Code: 85479090
Cable accessories pe glue heavy wall insultion tube

Description

HBDJ-110G (3.5X) NF is made of polyolefin materials extruded with a layer of hot melt adhesive inside. This product carries excellent insulation and sealing, corrosion resistance performance, with which it was found in wide applications like insulations and protections for high voltage cable middle connections and terminations, busbars, as well as different kinds of pipelines because of its excellent corrosion resistance, moisture-proof, and abrasion resistance performances.

Features

Semirigid, non-flame retardant, environment friendly
Min. shrink temperature: 80°C
Min full recovery temperature: 120°C
Continuous operating temperature:  -55°C ~110°C
Shrink ratio: 3.5:1
RoHS compliant
Standard color: black, more colors are available upon request

Technical Performance

Properties Typical Data Test Method
Tensile strength ≥14MPa ASTM D 2671
Elongation ≥400% ASTM D 2671
Tensile strength after heat ageing ≥12MPa 150ºC  ×168h
Elongation after heat ageing ≥300% 150ºC  ×168h
Longitudinal change 0~-10% ASTM D 2671
Flammability Non flame retardant -
Dielectric strength ≥18kV/mm IEC 60243
Volume resistivity ≥1013Ω.cm IEC 60093


Hot melt adhesive

Property Typical data Test method/conditions
Softening point 85±5ºC ASTM E 28
Water absorption <0.5% ASTM D 570
Peel strength(PE) ≥120N/25mm ASTM D 1000
Peel strength(AI) ≥80N/25mm ASTM D 1000


Dimensions(3.5:1) 

Size(mm) As supplied
D(mm)		 Recovered (mm) Standard package
Internal diameter
d		 Wall thickness
w		 (m/pc)
Φ9.0/3.0 ≥9.0 ≤3.0 ≥1.8 1.00~1.50
Φ13.0/4.0 ≥13.0 ≤4.0 ≥2.4 1.00~1.50
Φ22.0/6.0 ≥22.0 ≤6.0 ≥2.7 1.00~1.50
Φ33.0/8.0 ≥33.0 ≤8.0 ≥3.2 1.00~1.50
Φ40.0/12.0 ≥40.0 ≤12.0 ≥4.1 1.00~1.50
Φ45.0/12.0 ≥45.0 ≤12.0 ≥4.1 1.00~1.50
Φ55.0/16.0 ≥55.0 ≤16.0 ≥4.1 1.00~1.50
Φ75.0/22.0 ≥75.0 ≤22.0 ≥4.1 1.00~1.50
Φ85.0/25.0 ≥85.0 ≤25.0 ≥4.3 1.00~1.50
Φ95.0/30.0 ≥95.0 ≤30.0 ≥4.3 1.00~1.50
Φ105.0/30.0 ≥105.0 ≤30.0 ≥4.3 1.00~1.50
Φ115.0/34.0 ≥115.0 ≤34.0 ≥4.3 1.00~1.50
Φ130.0/36.0 ≥130.0 ≤36.0 ≥4.3 1.00~1.50
Φ160.0/50.0 ≥160.0 ≤50.0 ≥4.3 1.00~1.50
Φ180.0/50.0 ≥180.0 ≤50.0 ≥4.3 1.00~1.50
Φ200.0/60.0 ≥200.0 ≤60.0 ≥4.3 1.00~1.50
Φ235.0/65.0 ≥235.0 ≤65.0 ≥4.5 1.00~1.50
Φ265.0/75.0 ≥265.0 ≤75.0 ≥4.5 1.00~1.50
Φ300.0/85.0 ≥300.0 ≤85.0 ≥4.5 1.00~1.50
 Φ350.0/100.0 ≥350.0 ≤100.0 ≥4.5 1.00~1.50


Note: Non-standard dimensions and package are available on request

D Sub Connectors Right Angle Mount

Combo Power (High Current) D-sub Connectors, Right Angle Board Mount, Machined Contacts

Here are plenty of Combo Power (High Current) D-Sub Connectors female & male for sale. You can choose the best fitness one. Check the following pages of products and find out the Right Angle Combo Power (High Current) D-Sub Connector you want.


Features of Power D-SUB Connector Right Angle, Machined

Available in standard configurations
Contact Antenk for other sizes / contact arrangements.
Available in 10/20/30/40 amp power contacts, 5 amp signal.
Allows signal, high current & high voltage in one connector.
Contacts are pre-loaded into the insulator.

Materials of Power D-SUB Connector Right Angle, Machined
Shell: Steel, Nickel plated
Insulator: Glass-Filled Thermoplastic, U.L. 94V-O, Black
Signal Contacts: Machined Copper Alloy, Full Gold Flash
Power Contacts: Machined Copper Alloy, Full Gold Flash
Bracket: Cold Rolled Steel, Nickel Plated
Boardlock: Brass, Nickel Plated

Standard Power D Sub Connectors Right Angle Mount, High Density Power D Sub Connectors Right Angle Mount, Right Angle POWER-D Mixed Contact Connectors

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com