TCL L46V7600A-3D one-click install third-party software
Jiangmen MagicPower Electrical Appliances Co.,Ltd. , https://www.magicpowerfan.com
Installation Process 1 Download ADB One-click Installation Tool→2 Computer and TV Connect with a Router→3 Run ADB Open Tools→4 One-Click Installation Completed
Steps Step 1: Download ADB open tool and one-click installation tool
With the computer to download and decompress, there are two folders of TCPUDP debugging tool and one-click installation software, as follows 
Follow the steps to view the tcl smart TV's IP address as illustrated:
System settings 
Network settings 
Cable network settings 
Tcl TV automatically obtains an IP address 
Check the TV's IP 
Open the TCP UDP debugging tool 
- If the message "unable to connect ip" is displayed, or if the IP address is wrong, do not tick the hexadecimal place in this step.
Step 2: Run one-click installation, install the sofa butler into another folder - "One-click installation", double-click "Double-click to run a key installation" to enter the command interface and enter the IP address of the device obtained in the previous step, and press Enter to wait. can. 
If the message "unable to connect ip" is displayed, or if the IP address is incorrect, do not select the hexadecimal place in the TCP UDP debugging tool step.
Note for installing butler: If you use the sofa butler to download the application, it stays in the installation state, or you are prompted to prompt the words "Prohibited to install unknown source". Please turn on the automatic installation in “Settings†of the sofa butler kit, or try to plug in an external SD card and try again. 