Projector clearing Daquan technical information - appliance repair - Database & Sql Blog Articles
Projector clear technical data Zhejiang Kaimin Electric Co., Ltd. , https://www.ckmineinverter.com
1, SHARP, volume reduction + analog reduction, boot
2. When the instrument can be turned on, press the remote control on the time menu to turn on the power. 5 seconds can not be turned on. Press the remote control to turn on the power for 25 seconds.
3, EPSON bulb clearing method: the 100MA fuse that has been blocked. Instant short circuit. OK! MITSUBISHI bulb clearing method Left + right) + ENTER.
4, Sharp 300S, 300X is to press ENTER, down arrow, left arrow and then press ON on the remote control, it will be fine
5, Mitsubishi S250 clear method is. Up arrow + ENTER + start button
6, Panasonic: MENU---light bulb use time----ENTER[3S] Hitachi: RESET [3 seconds] PHILIPS: Select to the bulb time bar, press OK3 seconds Toshiba: no power supply [Power button + menu + OK + Input] Press and hold, then continue to press for 3 seconds
7. Hitachi presses RESET for a long time and displays the dialog box to select OK.
8, BenQ press the power button and then connect the power
9. Morningstar TL460 projector resets the lamp timer method Press the ON and UNDC- buttons on the projector while pressing the + and AUTOSYNC buttons on the projector. The screen displays 0000 after startup.
10, Panasonic (Panasonic) projector clear method [repost] Panasonic projector clear method: first press "MENU" to find the lamp usage time, then press "ENTER" for three seconds, after "POWEROFF" appears, turn off the power Restart OK!
11, 3M MP8030 clear method [Repost] Press the TIMER button on the remote control for two seconds, you can select zero in the dialog box that appears.
12, 3M8746 clear: long press RESET to display the lamp time, press the left and right button to move the cursor to 0000, press the left and right buttons to make the menu disappear, OK
13, Fujitsu: press and hold the OK button does not put + press the power button three times [applicable part machine]
14, EPSON 5300 bulb time can not be turned on can also be cleared by computer
15. 爰普生VD technical information: bulb usage time clearing problem: BY POKEMON13 For most newer models (the lamp holder does not have any detection components), it can only be cleared in the maintenance state. Press "HELP?" and "Ladder+" simultaneously in the power-on state until the service mode menu appears. The menu display includes the total machine usage time, the number of replacement lamps, the number of power-on, the number of normal shutdowns, and the current lamp usage time. If you need to clear the lamp usage time, you can press the "ENTER" and "ladder +" at the same time to clear the lamp usage time. For most older models (lamps with fuses for detecting new bulbs), they can only be cleared by hardware. The principle is: the new bulb lamp holder is equipped with a 100 mA detection fuse, which is installed because the fuse is open, and the internal bulb usage time counter is reset to zero when the power is turned on. At the same time, a large current flows through the fuse during the start-up time to blow the fuse. At this point the machine enters normal working condition. Therefore, if the lamp is replaced by a new lamp, it will automatically return to zero. If you can't find the 100mA fuse, you can short the two ends of the fuse. Turn on the power immediately after power on. Immediately after powering on, unplug the power supply and remove the short cable. Generally, it can be cleared successfully!
16, Philips projector clear method: In the boot, select the bulb time bar in the menu, press the OK button on the projector for 3 seconds;
17, Sharp 100S/00X/200/220, etc., projector lamp clear method, press and hold -, +, AUTOSYNC three keys in standby, after booting
18, AN100SAN100XAN120S press and hold (in the standby state) on the projector; +; and AUTO SYNC at the same time, press the ON and ;-; button on the projector; if the display LAMP0000H indicates that the lamp has been reset
19. Sharp DLP projector clear: In the standby state, press “right†+ “down†+ “enter†+ “power†at the same time.
20, Sharp video machine (PN200/300/500/C10, etc.) bulb time is cleared, press and hold "volume minus" + "select down" under standby, then boot
21, CN450SCN450XCN500X clear method: in the standby state (do not boot) at the same time press the projector; INPUTENTERUNDOON more than 3 seconds he can boot. If displayed; 100% of the bulb indicates to clear
22, SONYP15 projection bulb clearing method [Repost] Press RESET in the red light state, press the left button, then press the right button and press N to confirm the button for 7 seconds.
23, the United States to open the menu + OK
24, Fujitsu left + right + up
25, Epson 730 projector clear method [repost]: help button and trapezoidal correction 'minus' button simultaneously pressed, the maintenance menu appears, the trapezoidal correction button and the confirmation button can be cleared at the same time, there must be a signal before operating
26. Epson 3300 3500 Clearing Method 1. Open the lamp cover, check if the lamp is locked, or if the lamp is damaged. 2. Whether the bulb has been reinstalled after the new product has not been set. There are two types of models that must be reset: EMP-3300: Lock the cover after attaching the lamp. Press the Menu and Sync buttons on the projector at the same time and turn the power on again. Release the Menu after five seconds. And Sync two keys, you can reboot. EMP-3500: After installing the lamp, lock the cover. At this time, press the Tracking + and Sync + keys on the projector and turn the power on again. After five seconds, release the Tracking + and Sync + keys. You can reboot and the rest of the models do not need to be set.
27, projector lamp replacement method
1: SHARP, volume minus + analog minus, boot Sharp 300S, 300X is to press the ENTER, down arrow, left arrow and then press ON on the remote control, you can clear the sharp DLP projector: In the standby state, press "right" + "down" + "enter" + "power" at the same time.
2: PLUS can be turned on by pressing the remote control on the time menu for 5 seconds. If the machine is not on, press the remote control to turn on the power for 25 seconds.
3: EPSON
4: MITSUBISHI bulb clearing method Left + right) + ENTER. Mitsubishi S250 clear method is. Up arrow + ENTER + start button
5: Panasonic: MENU---Lamp time----ENTER[3S] Panasonic: First press "MENU" to find the lamp usage time, then press "ENTER" for three seconds. After "POWEROFF" appears, turn off the power and restart. OK ! 6: Hitachi: RESET [3 seconds] 7: PHILIPS: In the boot, select the bulb time bar in the menu, press the OK button on the projector for 3 seconds 8: Toshiba: No power supply [Power button + menu + OK + input] Press and hold the power button and continue to press for 3 seconds. 9: BenQ Press the power button and then connect the power supply 10: Morningstar TL460 Press the ON and UNDC- buttons on the projector while pressing the + and AUTOSYNC buttons on the projector. Display 0000 11: 3M MP8030 Press the TIMER button on the remote control for two seconds, select zero in the dialog box that appears. 3M8746 Press and hold RESET to display the lamp time, press the left or right button to move the cursor to 0000, and press the left or right button to make the menu disappear. , OK 12: Fujitsu: Press and hold the OK button + press the power button three times [Applicable part machine] 13: Sanyo SU31 is in the last item of the menu, in the next step, there is a light bulb cleared to 0, you only need to select YES all. Pull 14: AN100SAN100XAN120S hold down (on standby In the state of the projector; +; and AUTO SYNC at the same time, press the ON and ;-; button on the projector if the display LAMP0000H indicates that the lamp has been reset 15: CN450SCN450XCN500X clear method: in the standby state (do not turn on) simultaneously press The projector's INPUTENTERUNDOON can be turned on by himself for more than 3 seconds. If the display; the light bulb 100% indicates to clear 16SONY P15 projection bulb clearing method [Repost] Press RESET in the red light state, press the left button, then press the right button and press N to confirm the button for 7 seconds. 17: US Open menu + OK 18: Fujitsu left + right + upper 19: EPSON clear method: 100MA fuse that has been blocked. Instant short circuit. OK! 爰普生 VD technical information: lamp usage time clear problem: BY POKEMON13 For most newer models (the lamp holder does not have any detection components), it can only be cleared in the repair state. Press "HELP?" and "Ladder+" simultaneously in the power-on state until the service mode menu appears. The menu display includes the total machine usage time, the number of replacement lamps, the number of power-on, the number of normal shutdowns, and the current lamp usage time. If you need to clear the lamp usage time, you can press the "ENTER" and "ladder +" at the same time to clear the lamp usage time. For most older models (lamps with fuses for detecting new bulbs), they can only be cleared by hardware. The principle is: the new bulb lamp holder is equipped with a 100 mA detection fuse, which is installed because the fuse is open, and the internal bulb usage time counter is reset to zero when the power is turned on. At the same time, a large current flows through the fuse during the start-up time to blow the fuse. At this point the machine enters normal working condition. Therefore, if the lamp is replaced by a new lamp, it will automatically return to zero. If you can't find the 100mA fuse, you can short the two ends of the fuse. Turn on the power immediately after power on. Immediately after powering on, unplug the power supply and remove the short cable. Generally, it can be cleared successfully! Epson 730: Help button and trapezoidal correction 'minus' button are pressed at the same time, the maintenance menu appears, the keystone and confirmation keys can be cleared at the same time, there must be a signal to operate Epson 3300 3500 clear method 1. Turn on the bulb Shield, check that the lamp is locked, or that the lamp is damaged. 2. Whether the bulb has been reinstalled after the new product has not been set. There are two types of models that must be reset: EMP-3300: Lock the cover after attaching the lamp. Press the Menu and Sync buttons on the projector at the same time and turn the power on again. Release the Menu after five seconds. And Sync two keys, you can reboot. EMP-3500: After installing the lamp, lock the cover. At this time, press the Tracking + and Sync + keys on the projector and turn the power on again. After five seconds, release the Tracking + and Sync + keys. You can reboot and the rest of the models do not need to be set. 28. LG projector bulb is cleared. Press the up button for 5 seconds to pop up the menu, then press the main menu button to add the right button. 29. Mitsubishi projector X490: left + right + POWER 30. Sanling XD350U, when the power is turned on (the power indicator. LAMP lights are all red,) press the up button and the OK button. COMPAQ1600 press RESET for 30 seconds! 32. Sharp XR11 press the power button and the down button and determine 33. Sharp 200/220, etc., projector lamp clear method, press and hold -, +, AUTOSYNC three keys in standby, then turn on; CN450SCN450XCN500X clear method: in standby mode (do not boot) press projector at the same time; INPUTENTERUNDOON3 He can boot up in seconds. If displayed; the lamp 100% indicates to clear; AN100SAN100XAN120S press and hold (in standby mode) + and AUTO SYNC on the projector, press the ON and - buttons on the projector. If LAMP0000H is displayed, the lamp has been reset. Sharp DLP projection Clear the machine: In the standby state, press “right†+ “down†+ “enter†+ “power†at the same time; SHARP NV21 series clear mode: no power, press right, down, OK, always Press and hold for 5 seconds after receiving power
Tags: Hitachi 32LD9500TC, Tongfang LC-42B76, BenQ DV2680, Tongfang 42B55, Xoceco LC-22A1,
Morningstar cx-525 lamp bile timer reset preparation
Plus (Plex) projector can be cleared, the screen flashes 0000 after the initiative
Part of the menu, there is a column of lamp light, and part is yes;
The Mitsubishi projector clearing is usually cleared in the menu, and the candidate yes can be selected when the lamp is reset.
Sharp xr-20xa projection clear method: press the menu under the menu + down + inevitable + boot on avio (variable treasure) projector clearing and compiling models: plus u3-810sfc/u3-1080sfc/u3-810wzc/u3- 1080wzc/u2-x200uc/4-161/u4-121/v-1080c/v-807c/v-1100c/u2-850/u2-1500/u2-850w/u2-1500w/u5-121/u5-162. The light in the menu is cleared by the timer.
Cn450s cn450x cn500x clearing preparation: in the standby shape (do not boot) at the same time press the projector; input enter undo on more than 3 seconds, he can boot. Assume a flash; 100% of the lamp is clarified to clear;
780/380 future machinery (s20/40. etc.) clearing: press the power + menu + output (less one is necessary) without power, press and hold the power for 3 seconds, the red light makes the light Boot
Where is the result, expecting the axe itself!
Canon launched a small product comparison, mostly for Sanyo OEM, clear preparation reference Sanyo
Reses + left + right + inevitable (combined with most Sony models), the remote control can not be used on the panel buttons.
Nec 460/660 series clearing preparation: In the standby shape, press the help of the remote control for 10 seconds Epson emp-s1 lamp clearing: enter the menu to select reset, then select the lamp count reset, press the inevitable button After picking yes, it can be partially in the menu. There is a lamp lamp with this type of column. Some of them are yes 3m projectors, and the menu is selected in the boot time. Press the ok button on the projector for 3 seconds. In the middle, there is a column of lamp (lamp), and part is yes;
Vt47+ selects the clear phoenix timer under the default option in the menu, and then presses the inevitable button to ok. There is also an option for "closed phoenix warning" in other menus. Setting this to off is not It will remind you of the time when the Epson 730 projector is cleared.
US Open menu + inevitable BenQ projector clear (via process)
3m8746 clear: long press reset to flash the lamp, press the arbitrarily key to move the cursor to 0000, and press the arbitrage button to make the menu wear out, ok!
Morningstar cx-500/505/600/610/615 models: boot, no signal, press down, up, left, right to enter the menu, light bulb clear, color temperature, etc. are in the morning morning star cx490/500 /600/610 clear: power on, turn on the signal source, enter the menu, press the high and low keys to enter the output message shape, use the "+" button to reset, confirm the intervention. (unproven)
Sony p15 projection lamp
Eiki (Aiqi) projector clearing the morning star tl460 projector reset lamp bile timer preparation Toshiba t90a projector clear method: no power supply [power button + menu + output] press and hold the power supply for 3 seconds
Proxima projector clearing and pressing the on and undc buttons on the projector while holding down the + and autosync buttons on the projector
Sharp (sharp) projector clearing
Lg liquid crystal machinery: menu, up, down, left, right, inevitable;
Normal is cleared in the menu. Some models also have a manipulation prompt (lv2). Clearing is very convenient.
Old model: only use the resistor at the lamp holder: there is a small resistance (clearing) at the lamp holder. Just short the four small pins that should be absolutely in the machine. This will be annoying. And if the short circuit is not good, it may cause other results.
Aiqi projector by Sanyo OEM, clear preparation reference Sanyo Morningstar projector clearing the preparation of Hitachi hs800/cp-210 small mechanical zeroing situation is: move the menu to the time bar, press and hold the right key for 3 seconds;
The proxima projectors are mostly Sanyo OEMs, which can be referenced by Sanyo's clearing.
Sharp nv21 series clear situation: no power, according to the target's right, down, inevitable, inexhaustible 5 seconds after receiving power;
When you choose to reset the lamp in the menu
Nec (Japan) projector clearing the above preparation of the clearing does not know whether it can be inaccurate, see others write, generally effective.
There is not much international market for avio projectors. Here, you only need to clear the models for international sales.
Sharp dlp projector clearing: When pressing the standby shape, press "right" + "down" + "enter" + "power" at the same time. After booting, press the exit key for a few seconds. After the dialog bar is presented, press left or right to clear. Zero.8 and 6,7 series supervisors such as Sharp 200/220, etc., the projector lights are cleared, and the three keys of -, +, autosync are pressed under standby, and then turned on;
An100s an100x an120s Press and hold (in standby mode) + and auto sync on the projector at the same time, press the on and - buttons on the projector to assume that the lamp0000h confession lamp has been reset, press reset for 3 seconds, and the dialog is presented. Picking 0 is ok
Luxeon projector is cleared in the power supply without pressing the power + menu + inevitable + output, press and hold the power supply for 3 seconds, using all the machines before 780;
Canon (Canon) projector clearing
Asee (Australian) projector clearing
On boot (not positive)
Mp8030 clearing and compiling models: plus u2-811/u2-815/u2-815c/u2-1110/u2-1130/u2-x1130c/u2-1150. Cleared in 1100 hours: when the menu is selected Press on the remote control (8 seconds); after 1100 hours of application, you can't boot the shape, indirectly press on the remote control (25 seconds).
When the series of 830/840/850/440 arrives, it will show two lights, including the lamp, and the light is set to stand by the remote control for 20 seconds.
The ctx projector is cleared and the morning star is manufactured by Sharp and Lixun. Can refer to the preparation of Lixun and Sharp.
Ask (the projector) clear the program and press the menu (menu) and the lamp button to turn the total power
300s, 300x is to press the enter, down arrow, left arrow on the remote control at the same time and then press the morning star cx-59/69/550/650590/690 models are sharp foundry, clear and enter the training menu to see Sharp echo model;
Toshiba (Toshiba) projector clearing
Hitachi (Hitachi) projector clearing
Emp-3500: After installing the lamp, lock the cover. At this time, press the tracking+ and sync+ keys on the projector and turn the power on again. After five seconds, spread the tracking+ and sync+ keys. can.
Lg projector lamp clearing auxiliary key and trapezoidal correction "minus" button simultaneously press to display the training menu, trapezoidal calibration key and confirmation key can be cleared at the same time, there must be a signal to be able to manipulate The new model is fine when you set the light bulb from the beginning in the menu.
Sharp video machine (pn200/300/500/c10, etc.) when the lamp is cleared, press and hold "volume minus" + "select" under standby, and then turn it on;
Emp-3300: After installing the lamp, lock the cover. At this time, press the menu and sync keys on the projector and turn the power on again. After five seconds, spread the menu and sync keys, and start from the beginning. can.
Power, left and right during standby. At the same time, the power is turned on.
The emp-5600 system holds the help button to render the dialog box, and the selection is inevitable.
Lg projector lamp clears the press of the up button for 5 seconds, pops up the menu, then press the main menu button to add the right arrow
Philips (Philips) projector clearing
Souce up+down keystone zoom lumens The projector is cleared by pressing the timer button on the remote for two seconds, and the zero is selected in the dialog box that is presented. (not experienced)
Lg part of the model: press and hold the up button until the "lamp hours info" is presented, then press the menu to sharpen the multimedia projectors such as Sharp 100s/00x/200/220, and press and hold -, +, autosync three under standby. Key, after booting;
Epson (Epson) projector clearing
The 3m projector is manufactured by Hitachi and Fujitsu. The clearing and programming are not different. In short, the reset panel has the reset button. Refer to Hitachi's compilation. (In the boot, press reset for 3 seconds, present the dialogue, select 0. Ok)). Otherwise, try Fujitsu's clearing.
Press the reset under the shape of the red light, press the left button and then press the right button to confirm the button within 7 seconds. Sharp xr11 press the power button and the down button and the inevitable
The Sony projector can be cleared by selecting the lamp reset option in the menu.
Benq (Benji) projector clearing this is also the old model of the clearing, the new model is not known.
Hitachi UT42-MX08C, Xoceco LC-20Y18, Xoceco LC-42HU27, Amoi LC-37E51, ViewSonic N4200W.