Motorcyle Bluetooth Intercom for Mobile and MP3
Motorcycle Bluetooth intercom basic info:
Â
Item No
FDC-02VB
Standby
300 Hours
Material
Plastic
BT receiver size
82*32*25mm
Headset speaker
HiFi speaker
BT receiver weight
38g
Water resistant
IP*4
Charging time
About 4Â hours
Built-in coded
Advance nois control
Wind noise reduction Wide volume control
Motorcycle Bluetooth intercom show:
Package of motorcycle bluetooth intercom:
Motorcycle Bluetooth intercom features:
1. Maximum talking range 1000 meters between two riders.
2. Works as bluetooth handsfree for cell phone at range of up to 10 meters.
3. Wireless communication between three riders by Bluetooth system.
4. Suited to any sort of helmet for motorcyclists.
5. Up to 7Â hours talking time,Up to 300 hours standby.
6. Safe auto-receiving cell phone calls. If donot want to answer, reject and hang up with one button.
7. Support voice dialing,last number dial.
8. Listen music/audio wirelessly through A2DP from bluetooth music device,or connect GPS.
9. Control cell phone music through AVRCP: forward, backward, play, pause.
10. Freely switch between bluetooth cell phone, bluetooth intercom, stereo music.
11. With DSP echo cancellation and noise suppression technology, crystal clear voice quality is guaranteed in a high speed.
12. Button panel is water-proof and sun-proof, while the design is durable.
13. Easy installation.
14. Modern black, decent design.
15. Ideal for motorcycle and skiing helmet
Instructions Mounting the Inter Phone:
1. Take your Inter Phone Headset and slide it down into the slots in the Headset Clip Mount.Â
2. Now you need to attach the speaker and microphone arm to the inside of the helmet.Â
3. Next, take the Ear Speaker and attach it to the Velcro Pad. Run the Microphone Arm down along down to where your mouth will be.Â
4. Taking care to match the pins up, connect the Headset Plug to the Headset Socket.Â
5. Secure the cord of the Headset Plug inside the helmet. Tuck any extra wire into the helmet.Â
You have successfully mounted the Inter Phone.Â
Â
Main Unit Operation Steps:
1. Pairing with the other FDC-02, each equipment has power on.
2. Press key power on at the same time for 3-5s, till the red and blue light flash alternately.
3. Press either equipment key power on, till red light off, blue light flash, mean at the searching situation. After 5-7s, the other equipment red light off, blue light flash. Pairing successful.
4. Press either equipment key power on, can talk with each other.
                 Â
Package of   motorcycle intercom: Â
              Â
1 x Bluetooth headset receivers
1 x Stereo Headphones
4 x Velcro Pad
1 x Headset Clip with Fastening Screws
1 x Headset Clip with Velcro Pad
1 xTravel Charger (Four elected a)
1 x USB Cable
1 x Screwdriver
1 x User Manual
Â
If you have any demand,Pls don't hesitate to contact with us
Â
T:86-15802554141
Â