Changguang Semiconductor: The commercial value of COB in the field of downlights and spotlights has been highlighted
A Aluminum Stranded Conductor(AAC)is a bare conductor
(non-insulated conductor) applicable
for electrical power transmission in modern overhead power line with various voltage levels. It has cost and
weight advantages while comparing to copper wires and cables. And it is as
simple as installing copper wires. We have common aluminum conductor, rare earth aluminum stranded conductor with both single layer or multi layer
construction.
Main advantages
Attractive price
with high standard quality
Higher strength,
good electrical conductivity
Simple structure,
convenient installation and maintenance
Product features
Range:16 to 800 sq
mm²
Voltage Rating: Up
to 500kV
Delivery
length:800-4000m
Standard: IEC61089
Cross-section
Area
(mm²)
Core
No./Diameter
(mm)
Outer Diameter
(mm)
Min. DC
Resistance under 20℃
(Ω/km)
Calculated
Tensile Force
Calculated
Weight
(kg/km)
Min. Delivery
Length
(m)
Continual
Current-Carrying
(A)
16
7/1.70
5.10
1.8020
2840
43.5
4000
111
25
7/2.15
6.45
1.1270
4355
69.6
3000
147
35
7/2.50
7.50
0.8332
5760
94.1
2000
180
50
7/3.00
9.00
0.5786
7930
135.5
1500
227
70
7/3.60
10.80
0.4018
10590
195.1
1250
284
95
7/4.16
12.48
0.3009
14450
260.5
1000
338
120
19/2.85
14.25
0.2373
19420
333.5
1500
390
150
19/3.15
15.75
0.1943
23310
407.4
1250
454
185
19/3.50
17.50
0.1574
28440
503.0
1000
518
210
19/3.75
18.75
0.1371
32260
577.4
1000
575
240
19/4.00
20.00
0.1205
36260
656.9
1000
610
300
37/3.20
22.40
0.09689
46850
820.4
1000
707
400
37/3.70
25.90
0.07247
61150
1097.0
1000
851
500
37/4.16
29.12
0.05733
76370
1387.0
1000
982
630
61/3.63
32.67
0.04577
91940
1744.0
800
1140
800
61/4.10
36.9
0.03588
115900
2225.0
800
1340
Application
This cable is
widely used in overhead electrical power transmission lines with rated voltage
up to 500kV. It is also applicable for laying across the rivers, valleys and
other places where special geographical features exist.
FAQ
Q: Are you a factory or trading company?
Q: Can I visit your
factory?
A :Yes! You are welcome to
visit our factory for further detail check.
Our factory is located in Minqing,Fujian.You could choose to fly
to Xiamen/Fuzhou International airport. And tell us your flight No. We will arrange to pick you up
if you like.
Q: May I buy samples from you?
A: Yes! You are welcome to place sample order to test our superior quality and services.
Q: Can you put my brand name (logo) on these products?
A: Yes! Our factory accepts to print your
logo on the products.
Q: May I know the status of my order?
A: Yes .The order information and photos at different production stage of your order will be sent to you and the information will be updated in time.
As a professional
manufacturer, we also welcome OEM order according to relevant standard as your
request. Please feel free to contact us if you are inquiry electrical wires and
cables.
Aluminum Stranded Conductor Aluminum Stranded Conductor,Aluminum Stranding Conductor,Overhead Aluminum Stranded Conductor,Overhead Aluminum Stranded Conductor Fujian Lien Technology Co.,Ltd , http://www.liencable.com
Unlike ordinary SMD packaged devices, the COB surface light source bracket is non-standard, and the design of the bracket is directly related to the heat dissipation and light efficiency of the product. In the field of COB device design, the design of the bracket directly affects the life and technology of the product. index. The traditional COB product, the chip and the heat-dissipating aluminum plate have a layer of thermal conductive adhesive, which is not conducive to the heat dissipation of the chip, and the light effect is not ideal. The COB surface light source product directly places the chip on the aluminum plate, and the heat dissipation structure design is more reasonable. The light distribution design is more reasonable and the light extraction efficiency is higher.
Compared with high-power and medium- and small-power LED light source devices, COB surface light sources have been highly competitive in terms of heat dissipation and light efficiency. At present, the most important factor limiting the development of COB surface light sources is that product prices are still relatively high.
Long Wei believes that the current price of COB surface light source and medium and small power LED light source devices is relatively close in the application of LED downlights and LED spotlights. It has already had great commercial value, and this part of the market will be launched first.
It is understood that Changguang has invested a total of 800 million yuan in lighting production base construction projects in Wuhan, and has already completed a phase of investment of 200 million yuan. According to Changguang's calculation, after the project is put into production, the output value can reach 2 billion yuan.
Profile of Changguang Semiconductor: Shenzhen Changguang Semiconductor Lighting Technology Co., Ltd. was established by Wuhan Changjiang Communication Industry Group Co., Ltd. and Wuhan Economic Development Investment (Group) Co., Ltd. to develop high-end COB surface light source and LED lighting products. , production and sales of semiconductor light source suppliers.
Changguang has been engaged in the research and development of COB surface light sources since 2008 and started mass production in 2011. In the first half of 2012, the monthly output of Changguang COB surface light source was between 30,000 and 40,000 pieces, and the mass production efficiency was between 120-130 lm/W. The highest luminous efficiency in the laboratory exceeded 150 lm/W.
A : We are a manufacturer. We are professional in
developing and producing electrical wires and cables since 2001.